Iwata Eclipse HP-BS Gravity Feed Airbrush 
KUM Metal 2-hole Pencil Sharpener 
Iwata Power Jet Pro 110-120V Airbrush Compressor 
QuickFix Battery Powered Art Eraser 
Speedball Lino Handle Red Carded 
Excel No 92 Heavy Duty 2-Notch Utility Blade 5 Pk 
Winsor and Newton Drying Linseed Oil 75 ml (2.5 OZ) 
Angelus Easy Cleaner 237 ml (8 OZ) 
Grumbacher Japan Drier 75ml (2.5 OZ) 
Ampersand Scratchbord Wire Brush 
Pacific Arc Friction Divider 
Fundamentals Kids Easel Paper Roll 
Art Alternatives Gummed Paper Tape Kraft 2 in x 75 ft 
Matisse French Painter's Taboret 
Creative Mark Da Vinci Artist Viewfinder 
Futura Luxe Drawing Table 
Bag of Rags 
Prismacolor Magic Rub Vinyl Eraser White 
Mabef Deluxe Studio Easel M-06 
Winsor and Newton Gum Arabic 75 ml (2.5 OZ) 
BEST Classic Dulce Easel 
Excel Double Ended Stylus Tool 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
