Iwata Eclipse HP-CS Gravity Feed Airbrush 
Williamsburg Titanium Oil Ground 473 ml (32 Oz) 
Studio Designs Vision Mobile Cart 
Winsor and Newton Liquin Oleopasto 200 ml (6.76 FL/OZ) 
Excel No 16 Stencil Edge Blade 
Iwata Air Valve Guide 
Akua Tack Thickener 118 ml (4 OZ) 
Iwata Adapter for Thayer Chandler and Badger Hose 
Grafix Dura-Lar Silver Roll .002 54 in x 12 Ft 
Richeson Pro Tool 6-1/8 in Long 
BEST Full Tilt Manhattan Easel 
Logan 550-1 Simplex Classic Mat Cutter Capacity 40 inch 
Winsor and Newton Watercolor Texture Medium 75 ml (2.5 OZ) 
Westcott Ruler and Protractor Combo Set Metric 8 in (KT-2) 
Scotch Postal Wrap 30 in x 5 Yds 
KUM Metal 2-hole Pencil Sharpener 
Iwata Female to Female 1/4in Fitting 
Logan Basic Mat Cutting Book 64 Pg 
Iwata Smart Jet Plus Tubular Compressor 
Logan F500-2 Dual Elite Point Driver 
Logan 324-5 Blades 5 Pk (For use with model 201, 1100) 
BEST The Crank Easel 
BEST Deluxe Lobo Easel 
Iwata Cup W/ Lid(Side) 1/2 oz / 15 ml 
Grumbacher Miskit Liquid Frisket 35ml (1.2 OZ) 
Studio Designs Futura Light Table 
Creative Mark Fan Pan Artist Watercolor Set of 42 
Daylight U35600 Luminos Table Lamp 
Color Wheel Pouch 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
