Studio Designs Prime Adjustable Top Drawing Table 
Angelus Easy Cleaner Kit 
Bag of Rags 
Gorilla Epoxy 
Prismacolor Design Art Gum Eraser 
Excel No 59 Strip Cutter Blade 
Art Alternatives Tortillions Assorted Pack of 6 
Speedball Calligraphy Nibs LC1/LC2 Nibs 2 Per Card 
Mabef Deluxe Studio Easel M-06 
Logan 301-1 Compact Classic Mat Cutter Capacity 32in 
Iwata Female to Female 1/4in Fitting 
Art Alternatives Sierra Aluminum Sketching Easel 
Iwata Adapter for Thayer Chandler and Badger Hose 
Logan 5000 8-Ply Handheld Mat Cutter 
QuickFix Battery Powered Art Eraser 
Pacific Arc Friction Divider 
Elmers School Glue Washable Gel 946 ml (32 OZ) 
Iwata Eclipse HP-BS Gravity Feed Airbrush 
BEST The Crank Easel 
Tombow Dual Brush Pen Blending Kit 
Excel End Nipper Pliers 
Fundamentals Kids Easel Paper Roll 
Excel Double Ended Stylus Tool 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
