Mabef Deluxe Studio Easel M-06 
Iwata Eclipse HP-CS Gravity Feed Airbrush 
Studio Design Futura Office Stool 
BEST The Crank Easel 
Iwata G-Series G6 Bottle Set Side Feed Airbrush-Gun 
Excel 18Mm 8-Point Snap Blade 
Fundamentals Kids Easel Paper Roll 
Creative Mark Modeling Turnette 8" 
Excel Aluminum Painter Hand Rest Mahl Stick 
KUM Dome 2 Hole Pencil Sharpener 
Ampersand Scratchbord Fiber Brush 
QuickFix Battery Powered Art Eraser 
Logan 440-1 Team System Plus Mat Cutter Handheld 40 in 
Futura Luxe Drawing Table 
Masterson Sta-Wet Aqua Pro Palette 11 x 15 in 
Excel No 59 Strip Cutter Blade 
Gorilla Wood Glue 118 ml (4 OZ) 
Daylight Halo Go Magnifier Lamp 
Faber Castell Art on The Go Graphite Pencil Set 
Cretacolor Charcoal Chunky Stick Set of 12 
Studio Designs Prime Adjustable Top Drawing Table 
Elmers Multi-Purpose Spray Adhesive 311g (11 OZ) 
Daylight UN1520 Duo Lamp Table 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
