Mabef Deluxe Studio Easel M-06 
Grafix Laminating Film .005 3 Pk 9 x 12 in 
Logan 440-1 Team System Plus Mat Cutter Handheld 40 in 
Iwata Eclipse HP-BCS Siphon Feed Airbrush 
Creative Mark Modeling Turnette 8" 
Grumbacher Japan Drier 75ml (2.5 OZ) 
Logan F500-2 Dual Elite Point Driver 
Iwata Adapter for Thayer Chandler and Badger Hose 
BEST Abiquiu Deluxe Easel 
Logan 5000 8-Ply Handheld Mat Cutter 
BEST Deluxe Lobo Easel 
Krylon Glowz In The Dark Spray 400 ml 
Fundamentals Kids Easel Paper Roll 
BEST Classic Dulce Easel 
Logan 2000 Mat Cutter Push Style 
Winsor and Newton Granulation Medium 75 ml (2.5 OZ) 
Iwata Custom Micron CM-B Gravity Feed Airbrush 
Daylight Halo Go Magnifier Lamp 
Lineco Pressure Sensitive Mending Tissue 1/2 in x 50 Ft 
Art Alternatives Sierra Watercoor Easel 
Logan 350-1 Compact Elite Mat Cutter 32 in 
Excel Straight Utility Blade 5 Pk 
Iwata Power Jet Lite Compressor 
Richeson Clay Tools Potters Rib - Set of 3 
Iwata Female to Female 1/4in Fitting 
QuickFix Battery Powered Art Eraser 
Excel No 90 Pocket Air Release Retractable Awl Tool 
KUM Dome Pencil Sharpener 
Lineco Book Binding Tool Kit 
Winsor and Newton Iridescent Watercolor Medium 75 ml (2.5 OZ) 
KUM 228M2 High Cube Pencil Sharpener 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
