Speedball Baren 4 in Diameter 
Studio Designs Hourglass Craft Center 
Iwata Custom Micron Takumi Side Feed Dual Action Airbrush 
Iwata Adapter for Thayer Chandler and Badger Hose 
Iwata High Performance HP-B Plus Gravity Feed Airbrush 
Iwata Sprint Jet Compressor 
Logan 350-1 Compact Elite Mat Cutter 32 in 
Winsor and Newton Oil Painting Primer 1 Litre (33.8 OZ) 
Creative Mark Round Chubby Paint Brush for Kids 10 Pk 
Iwata Smart Jet Pro 110-120V Airbrush Compressor 
Iwata Eclipse Air Valve Guide Screw 
Speedball Calligraphy Nibs LC1/LC2 Nibs 2 Per Card 
Iwata Adaptor for Paasche Hose 
Masterson Sta-Wet Handy Palette 8.5 x 7 in 
BEST The Crank Easel 
Glassine Paper 40 gsm 24 x 36 in 
Williamsburg Rabbit Skin Glue 1lb 
Speedball Screen Retarder Base 236 ml (8 OZ) 
BEST Giant Dulce Easel 
Williamsburg Wax Medium 473 ml (16 Oz) 
Excel Coping Saw 
Fredrix Acrylic Primed Cotton Rolls - Style 583 Alabama 56 in x 6 Yds 
Iwata Custom Micron CM-B Gravity Feed Airbrush 
Iwata NEO AIR Compressor 
Akua Blending Medium 118 ml (4 OZ) 
KUM Metal Long Point Pencil Sharpener 
Generals Drawing Class Essential Tools Kit 
Excel No 16 Stencil Edge Blade 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
