Art Alternatives Gummed Paper Tape Kraft 2 in x 75 ft 
Gorilla Tough and Clear Mounting Tape Squares 1 in 
Logan 324-5 Blades 5 Pk (For use with model 201, 1100) 
Logan F500-2 Dual Elite Point Driver 
Castin Craft Mold Release and Condition 118ml (4OZ) 
Eclipse Spring Guide 
Logan Basic Mat Cutting Book 64 Pg 
Alumicolor Drafting Fan Silver 7.75 in 
Iwata High Performance HP-C Plus Gravity Feed Airbrush 
Logan F500-4 Dual Air Matic Point Driver 
GorillaWeld Epoxy Glue 0.5 oz 
Iwata Eclipse Air Valve Guide Screw 
Papermate Pink Pearl Arrowhead Eraser Box of 144 
Mabef Master Studio Easel Plus M-04-PLUS 
BEST Deluxe Lobo Easel 
Logan 4000 Deluxe Mat Cutter Deluxe Hand Held 
Matisse French Painter's Taboret 
Williamsburg Wax Medium 473 ml (16 Oz) 
Art Alternatives Studio Table Top Easel 
Faber Castell World Colors How to Draw Faces 
KUM No. 250 Lead Pointer 
Futura Luxe Drawing Table 
Logan 550-1 Simplex Classic Mat Cutter Capacity 40 inch 
Winsor and Newton Blending Medium 75 ml (2.5 OZ) 
Excel No 90 Pocket Air Release Retractable Awl Tool 
Aves FIXIT Sculpt 
Angelus Water & Stain Repellant 150 ml (5 OZ) 
Lineco Archival Mounting Strips Transparent Pkg of 60 Strips 4 in 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
