Excel Double Ended Stylus Tool 
Iwata Female to Female 1/4in Fitting 
Akua Retarder 118 ml (4 OZ) 
Winsor and Newton Ox Gall Liquid 75 ml (2.5 OZ) 
Prismacolor Design Art Gum Eraser 
Williamsburg Cold Pressed Linseed Oil 118 ml (4 Oz) 
Iwata High Performance HP-BC1 Plus Siphon Feed Airbrush 
Logan 270-100 Blades 100 Pk 
Mabef Lyre Easels M-11 
Creative Inspirations Gel Pen Set 120 Pc 
Color Wheel Tote 
BEST Terrero Taboret 
Iwata G-Series G6 Bottle Set Side Feed Airbrush-Gun 
Iwata Custom Micron CM-C Plus Gravity Feed Airbrush 
Black Ink Thai Soft Unryu White 23 x 34 in 
Excel K11 Metal Safety Scraper With 6 Blades 
Excel #65 Executive Retractable Pen Knife Blades 2 Pk 
Masterson Sta-Wet Super Pro Palette 11 x 15 in 
Lineco Ph Testing Pen White Barrel 
Pacific Arc Sandpaper Pad Pointer 
Art Alternatives Multi-Media Easel 
Daylight DuoLamp Floor 
Acurit Rolling Ruler 
Fundamentals Kids Easel Paper Roll 
Excel No 21 Stainless Steel Blade 5 Pk 
Description
Rebound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Rebound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, etc.
Rebound 25 is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound 25 can be inverted as a glove molds. Rebound 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Rebound 40¬†is an easy-to-use platinum-cure silicone rubber which self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Features
Rebound 40 is hard and not very flexible. It is compatible with Rebound 25. For example, you can apply two coats of Rebound 25 and back it up with two coats of Rebound 40.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). And because Rebound is a platinum silicone, it will last for many years in your mold library. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.
Advantages Over Urethane Brush-On-Rubber:
- Rebound will not stick to most surfaces, so surface preparation is minimal
- Two liquids that mix easily together
- stands up better to production casting of resins and low temperature melt metal alloys
- has a long library life
Note: These products will not work with modeling clays containing sulfur under any circumstances.
