Castin Craft Mixing Cup Set 
Tombow MONO Sand and Rubber Eraser 
BEST Deluxe Lobo Easel 
Fundamentals Kids Easel 
Studio Designs Futura Light Table 
Richeson Pro Tool 6-1/8 in Long 
Smooth-On Ease Release 200 
Winsor and Newton Artisan Varnish Remover 75 ml (2.5 OZ) 
Winsor and Newton Permanent Masking Fluid 75 ml (2.5 OZ) 
Excel No 16 Stencil Edge Blade 
Fredrix Acrylic Primed Cotton Rolls - Style 583 Alabama 56 in x 6 Yds 
Iwata Adapter for Thayer Chandler and Badger Hose 
Excel No 59 Strip Cutter Blade 
BEST European Easel 
Grafix Laminating Film .005 3 Pk 9 x 12 in 
Mabef Lyre Easels M-11 
Winsor and Newton Lifting Preparation 75 ml (2.5 OZ) 
Winsor and Newton Artisan Thinner 75 ml (2.5 OZ) 
Excel #65 Executive Retractable Pen Knife Blades 2 Pk 
Lineco Frame Sealing Tape Self Adhesive 1.25in x 85 Feet 
Elmers Multi-Purpose Spray Adhesive 311g (11 OZ) 
Akua Release Agent 237 ml (8 OZ) 
Masterson Sta-Wet Painters Palette 9 x 12 in 
Snazaroo Hi-Density Sponge Pack of 2 
BEST Giant Dulce Easel 
Ampersand Scratchbord Tool Kit 
Iwata Power Jet Pro 110-120V Airbrush Compressor 
Iwata Custom Micron CM-C Plus Gravity Feed Airbrush 
Ampersand Scratchbord Ink Set 6 x 15 ml Bottles 
Zap PT-19 Plasti-Zap Ca 1/3 Oz 
Lineco Pure Methyl Cellulose 1.5 Oz (42.5g) 
Description
What it does
- Breaks water tension to improve flow and lower viscosity
- Gives a smooth finish with less brush strokes due to reduced surface friction
- Increases transparency and makes color more absorbent and blendable
How to use it
- Fully intermixable with all Liquitex products
- First dilute your concentrated Flow Aid with water ‚ 1 part Flow Aid to 20 parts water ‚Äì distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if you want a more concentrated effect
- Add up to 25% of diluted Flow Aid to your color/medium and stir slowly to avoid foaming. If it does foam, leave it to sit while the foam disappears
- If applying to an absorbent surface, your color/medium will sink in like a stain or dye; if using on a non-absorbent surface your color/medium will be more fluid and take longer to dry
How not to use it
- Do not use Flow Aid undiluted as it results in poor acrylic adhesion, cracking, tackiness and water sensitivity
- As this is an additive ‚ with no acrylic binders do not add more than 25% to your color/medium and do not mix with other additives. This can cause excessive shrinkage, cracking and the acrylic film to break down
- Do not shake or stir too vigorously as foam will form
- Don‚t use for marbling as it breaks the surface tension of the water
- Do not use with any non-acrylic media
