Liquitex Flow Aid – 118ml (4 oz)

MSRP: $13.29
You save $3.99

$9.30

Add to Wishlist
Add to Wishlist
SKU: R10403 Categories: , , Tag:

Description

What it does
  • Breaks water tension to improve flow and lower viscosity
  • Gives a smooth finish with less brush strokes due to reduced surface friction
  • Increases transparency and makes color more absorbent and blendable
How to use it
  • Fully intermixable with all Liquitex products
  • First dilute your concentrated Flow Aid with water ‚ 1 part Flow Aid to 20 parts water ‚Äì distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if you want a more concentrated effect
  • Add up to 25% of diluted Flow Aid to your color/medium and stir slowly to avoid foaming. If it does foam, leave it to sit while the foam disappears
  • If applying to an absorbent surface, your color/medium will sink in like a stain or dye; if using on a non-absorbent surface your color/medium will be more fluid and take longer to dry
How not to use it
  • Do not use Flow Aid undiluted as it results in poor acrylic adhesion, cracking, tackiness and water sensitivity
  • As this is an additive ‚ with no acrylic binders do not add more than 25% to your color/medium and do not mix with other additives. This can cause excessive shrinkage, cracking and the acrylic film to break down
  • Do not shake or stir too vigorously as foam will form
  • Don‚t use for marbling as it breaks the surface tension of the water
  • Do not use with any non-acrylic media

Additional information

Weight 0.10648125 lbs
Dimensions 7 × 8 × 2 in
Brands

Liquitex

Media Type

Cart
Your cart is currently empty.